House of Doors - Roanoke, VA

NFPA (National Fire Protection Association) 80 - 2007 edition requires the use of metal hinge shims for use with fire rated doors if the doors are wood or metal. House of Doors - Roanoke, VA is your source for code approved metal hinge shims. Contact us today for pricing. House of Doors - Roanoke, VA is the premier supplier and installer of commercial doors, frames, hardware, toilet partitions and accessories as well as ADA low energy automatic door operators in the Roanoke and New River Valleys of Virginia. House of Doors - Roanoke, VA provides sales, service (repair) and installation of quality commercial doors, door frames, door hardware, ADA automatic operators, electronic access control, bath accessories and bath partitions. Located in Roanoke, Virginia. http://www.HouseOfDoors-Salem.com Subscribe to House of Doors - Roanoke, VA YouTube channel http://tinyurl.com/HouseOfDoors

House of Doors - Roanoke, VA Check out Accuwrite Fire Door Inspections LLC new blog: Accuwrite FDAI Blog Please feel free to follow the blog and pass it on to your friends. Accuwrite Fire Door Inspections

House of Doors - Roanoke, VA Clear opening width for doors can be confusing, House of Doors - Roanoke, VA is here to sort it out for you. The requirements listed below can be found in the International Building Code (IBC), the International Fire Code (ifc), ICC A117.1, NFPA 101 - Life Safety Code and the 2010 ADA Standard for Accessible Design. Minimum clear opening width applies to both doors in an accessible route but also openings in the means of egress Highlights of clear opening requirements: -Typically doors must provide a minimum of 32" of clear opening width. -Clear opening width is measured between the face of the door and the stop on the strike leg of the frame when the door is opened to 90 degrees. -Swing clear hinges may be able to be used to increase the clear opening width by relocating the pivot point of the opening. -A pair of doors must have at least one leaf that provides 32" of clear opening width when measure from the face of the open door to t...